ILUG-Cochin

The resources page is intented to provide a wealth of information to the Swathanthra Software Community. The page
serves as a framwework to encourage people to write Documentations, HowTos and to share Links containing information on free software.

The page is not a perfect framework for this activity, but a way to get started. Ideally what we need is a wiki. But once we have people starting to contribute it will be a wiki for sure.

The Resources page is for you to put any bit of information into the page as mentioned below.

• Write an article or howto on any topic which you find there aren’t any resources or if you can make a better one
• Send a mail to the section maintainer
• Once it is approved it is posted
• Documents could be attached to the resource that you are posting. This attachment must be any one of the
  following formats – PDF, TXT, ODT, ODP, PS, HTML, PNG, OGG

Another important intention of the section is to provide Documentation/Howtos in Malayalam, which is one very important aspect.
The prime intention of the site is to provide people with information to
get started with free software, because no Swathanthra software site is complete without a resources corner.

So, why wait? Start emailing your HowTos and Articles to kurianmthayil[at]gmail[dot]com.

Kurian Resources ernakulam, free software, gnu/linux, ilug, kerala, kochi, linux, lug

1. Connect the mobile to the computer, and check the dmesg or /var/log/messages and see if there is any change in the logs
2. Make sure you have the USB packages installed in the laptop/PC namely – uhci, usbutils, wvdial, etc.
3. Now execute the command,
   
   # wvdial /etc/wvdial.conf
4. This will create the entries in the /etc/wvdial.conf with the baud rates and the phone type /dev/ttyUSB0.
5. File: /etc/wvdial.confwill be as shown below:

   [Dialer Defaults]
   
   Init1 = ATZ
   
   Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
   
   Modem Type = Analog Modem
   
   Baud = 115200
   
   New PPPD = yes
   
   Modem = /dev/ttyUSB0
   
   ISDN = 0
   
   Phone = #777
   
   Password = your reliance phone number
   
   Username = your reliance phone number




6. Issue the command
   
   #wvdial
7. This will e>stablish a PPTP connection with your PC and Reliance network. You can confirm by checking `ifconfig` in the terminal.
8. If you had already configured your ethernet interface, then you may have to disable it before step 6 & 7. Else you will have to include default gateway in Kernel Routing Table.
   
   # route add -net 0.0.0.0 gw
9. Check with #route -n and see if the entry have come there correctly.

You are good to go now.

Kurian Howto, Resources